VS Power System Control Panel Manual (4 Button)
Operation guide for Viking Spas VS Power System 4-button control panel.
Common Control Panel Problems This Guide Covers
A technician should open this document when performing initial spa setup, operating the control panel, or adjusting basic spa functions like temperature and jets..
What it helps you resolve
- Spa not starting up correctly after power on
- Cannot set spa temperature
- Jets not turning on or off
- Pump not responding to button presses
- Spa stuck in priming mode
- Jets turning off too quickly
When not to use
This document is not suitable for diagnosing complex system malfunctions, interpreting specific error codes, or performing internal component repairs.
Quick diagnosis
Before replacing any parts, ensure the spa has completed its Priming Mode and that all pumps are free of air by repeatedly pressing the 'Jets' button(s) during this initial phase. Also, confirm button presses are not too quick, as they may not register.
Still seeing issues with your VS Power System Control Panel Manual (4 Button)?
Our certified technicians service Viking Spas equipment across Oak Island, Southport, and Caswell Beach, NC. We can diagnose it in person.
Request ServiceViking Spas Control Panel FAQs
What does 'Priming Mode' mean and how do I exit it?
Priming Mode ( ) is an initial startup phase where you ensure all pumps are free of air. It lasts less than 5 minutes, and you can exit it by pressing the 'Temp' button.
Do the jets or pumps turn off automatically?
Yes, the low-speed of Pump 1 will turn off after 4 hours, and the high-speed will turn off after 15 minutes. Other devices controlled by 'Jets 2' also turn off after 15 minutes.
What is a common reason for buttons not responding on the control panel?
A common reason for buttons not registering is pressing them too quickly in sequence. Allow a brief pause between presses for proper registration.
How does this manual differ from a general spa system manual?
This manual specifically details the operation of the VS Power System Control Panel (4 Button), focusing on user interface functions like temperature adjustment and jet control, rather than the overall spa system's internal components or advanced diagnostics.
Qualified personnel only. Opening electrical panels, control boards, or equipment enclosures involves dangerous voltages and should only be performed by licensed pool or electrical technicians. Unauthorized service may void your manufacturer warranty. If unsure, contact a qualified professional.