Super Pump® Series Manual
Installation, operation, and maintenance for the Hayward Super Pump series.
Common Pump Problems This Guide Covers
This document should be opened when installing, operating, maintaining, winterizing, or troubleshooting a Hayward Super Pump® Series pump..
What it helps you resolve
- My Super Pump isn't turning on.
- My Super Pump is making a strange noise.
- How do I install a Hayward Super Pump?
- My Super Pump is leaking water.
- I see a 'FLOW' error on my Hayward Super Pump.
- How do I change the shaft seal on my Super Pump?
When not to use
Do not use this manual for troubleshooting issues with other pump models, non-Hayward equipment, or general pool system problems unrelated to the Super Pump® Series pump itself.
Still seeing issues with your Super Pump Series Manual?
Our certified technicians service Hayward equipment across Oak Island, Southport, and Caswell Beach, NC. We can diagnose it in person.
Request ServiceHayward Pump FAQs
What does the 'FLOW' error code mean on my Super Pump?
While not explicitly detailed in this excerpt, a 'FLOW' error typically indicates insufficient water flow through the pump, which could be due to a clogged skimmer, dirty filter, or air in the system.
Will a pump error code, like 'FLOW', clear on its own?
No, error codes generally require the underlying issue to be resolved and may need a manual reset or power cycle to clear once the problem is fixed.
What is the most common cause of faults addressed in this Super Pump manual?
Based on the manual's content, common faults often relate to installation errors, operational issues like priming, or maintenance needs such as a worn shaft seal.
How does this Super Pump Series Manual differ from a general Hayward pump troubleshooting guide?
This manual provides specific installation, operation, maintenance, and troubleshooting instructions tailored exclusively for the Hayward Super Pump® Series models listed.
More Hayward Guides
Qualified personnel only. Opening electrical panels, control boards, or equipment enclosures involves dangerous voltages and should only be performed by licensed pool or electrical technicians. Unauthorized service may void your manufacturer warranty. If unsure, contact a qualified professional.